It was a day of small things.
Firstly I checked and adjusted set of carburettors.
I replaced several rubbers and seals, set the float heights and visually balanced the carburettors by equalising the slide gap. The remit was to inspect and report back but I tidied up a few loose ends along the way. One of the mixture screws was seized solid and a screw had been snapped off.
Firstly I checked and adjusted set of carburettors.
I replaced several rubbers and seals, set the float heights and visually balanced the carburettors by equalising the slide gap. The remit was to inspect and report back but I tidied up a few loose ends along the way. One of the mixture screws was seized solid and a screw had been snapped off.
Then I started removing a seat cover. Before fitting the new cover I think I have to do some work on the foam as it has been cut down and lost it's shape.
Finally I spent some more time filing the splines down on the 750 starter gear wheel as it was still a bit too tight to fit on the shaft. All sorted now, but waiting on the new chain before rebuilding it.